Fertilizer Pressure Spray Drying Equipment with Long Service Life

• Customization: Available
• Heating Mode: Convective
• Material Status: Solution, Cream
• Model NO.: YPG
• Atomization: Pressure Atomization
• Flow: Contra-Flow
• Heat Source: Electricity, Steam, Coal Gas, Natural Gas
• Type: Pressure Spray
• Color: According to The Design Requirements
• Purpose: Medicine, Chemicals, Food
• Models: Ypg Series
• Place of Production: Jiangsu Changzhou
• Transport Package: Wooden Package
• Specification: customised
• Trademark: YUANZE
• Origin: China
• Production Capacity: 200

Product Description

 

Description:
The set is an apparatus that can finish drying and granuliating at the same time .The needed ball granule with certain size and ratio can be got in accordance with requirements of process by adjusting pressure flow, and size of atomizing hole.
  The working process of the set is as follow :the liquid of raw material is pumped through high-pressure pump, the liquid of raw material atomizes to small drops, then it gathers with hot air and fall off.Most parts of powder material will be collected through the outlet of discharge at the bottom.The wasted air and fine powder material will be separated through cyclone.The wastes air will be exhause through draught fan and powder will be collected at the bottom of cyclone.At the outlet it can also equipped with two grades of duster.It ratio of recove will be over 96%-98%.
  The tower body,pipes,separator of the set where will contact with raw material made of SUS304. There is enough layer of heat preservation between inner and outer of tower body .The filled material is fine glass cotton, The tower body is also equipped with observation door,sight glass,lamp-house and control instruments that is controlled and displayed through electric control panel.
  The heat source of the set may be steam or electric heater,Its feature are convenient in operation, quick in start,compact structure,clean of hot air and so on, Moreover being installed control and regulating device inside electric control cabinet , the inlet temperature can be controlled through stepless regulation. The steam,oal fule can be applied to the place where has not electricity . It can replace electric heating locally or fully .
  The factory can provide different heating method in according with the practical condition of customer .

Principle:
The working principle of the pressure spray dryer is as follows: the liquid material (filtered liquid material) is sent into the pressure atomizer to be atomized into small droplets through a high pressure of 2-20 mpa, after atomization of droplets (surface area greatly increased) and hot air full contact, rapid completion of the drying process. To obtain a powder or fine particles of the finished product.
 

Structural Diagram:

Features:
The dry speed is fast , the surface area of raw material liquid after atomized will be increased greatly,95%-98% of moisture can be evaporated at moment, the time of drying needs about ten seconds to several-tens seconds, it is suitable for drying material particulary.
The finished product is ball granule with uniform size .Its fluidity and solubility are good,the purity of product is high and its quality is good.
It applied scope is wide .According to the characteristics of raw material.It can use hot air todry or use cool air togranulate.It has strong adoptability to raw material .
Its operation is simple and stable,control is simple and convenient, and easy to realize automatic operation .  

Scope of application:
Spray drying granulation:
chemical industry: organic catalysts, resins, synthetic detergent, oils, ammonium sulfate, dyes, dye intermediates, white carbon black, graphite, ammonium phosphate and so on.
Food: amino acids and analogues, condiments, protein, starch, dairy products, coffee extract, fish meal, meat essence, etc. .
Pharmaceutical: Chinese patent medicines, pesticides, antibiotics, pharmaceutical granules, etc. .
Ceramics: magnesium oxide, porcelain clay, various metal oxides, dolomite and so on.
Spray granulation: various fertilizers, alumina, ceramic powder, pharmaceutical, heavy metal super hard steel, fertilizer, granular detergent, Chinese patent medicine, etc. .
Spray cooling granulation: amino fatty acids, paraffin, glycerin, tallow, etc. . Spray crystallization, spray concentration, spray reaction are also often used.

Technical Parameters:




Product Presentation:

Company Introduction:
Changzhou Yuanze Drying Equipment Co., Ltd. specializes in the production of drying equipment, granulatingequipment, mixing equipment, crushing equipment, dust removal equipment, transmission equipment, dryingequipment and other products, providing a variety of non-standard equipment design, manufacture and installation.Products are widely used in pharmaceutical, chemical, food, feed, biology, electronics and other industries. Since itsinception, the company has provided excellent pre-sale technology and after-sale tracking service to everycustomer, adhering to the company's tenet of "excellent quality, preferential price, timely supply", abiding by thebusiness ohilosophy of "honesty, praamatism, win-win", providing professional services and excellent products tocustomers.

 

The company has a professional technical team, integrating the industry's cutting-edge technology and advancedbusiness management model, actively explore the market, to provide technical exchanges, equipmentmanufacturing, instaation and commissioning, technical training and product after-sales tracking services to alsectors of society.

 

The company is eguipped with testing machines, Customers from allwalks of life are welcome to carry out materiatests and inspect orders. Our company will work hand in hand with you, mutual benefit and win-win, create the future!

 

Business Policy: Integrity as the Foundation, Credit as the Supreme, Quality as the Survival Principle

Service tenet: reasonable price,timely delivery, sincere service for development

Qualification Certificate:

FAQ:

1.Where is your factory?
Our company is located in Zhenglu town, Tianning District, Changzhou.

2.How can I get to Your Factory?
A: You can fly directly to Pudong or Shanghai Hongqiao International Airport, then take a high-speed train or bus to Changzhou Railway Station, then we can pick you up in Changzhou Railway Station for our company. My company is about 20km from Changzhou Railway Station.
If you are in China, you can fly to Changzhou Benniu Airport or Wuxi Airport, or you can take a train or bus to our city.
We sincerely welcome you to our company at any time.

3.Delivery Time?
The delivery time is 10-60 days and will vary according to the type of machine, the mode of transportation chosen and the availability of the parts.

4.What is the quality warranty?
The machine is guaranteed to be new (or unused) for a period of 12 months. During this period, the seller will provide free maintenance due to machine quality and free spare parts.

5.What if the machine breaks after the warranty period?
When the machine failure, we will immediately provide you with technical advice and solutions. For those parts that are easy to wear, we guarantee a long-term supply of high-quality parts.



Services:
Pre-sale service
We invite our customers to visit our company and have a face-to-face conversation about the technical requirements.
Sales service
Responsible for debugging the equipment according to customer's requirements for various technical data. Our engineers will train our customers on equipment characteristics and operating points to ensure that the equipment is operating in optimum conditions.
The Adjuster
We provide installation, commissioning, maintenance and training services; provide relevant technical information, equipment, software and GMP certification materials; set up after-sales service hotline, arrange staff to visit customers every year, know more about customer requirements, such as operational issues in the production of customer equipment.
Quality Assurance
Our company is committed to the strict implementation of ISO9001 quality system certification standards, commitment to provide us with new equipment. Advanced Technology, good quality. The equipment is safe and reliable, affordable and easy to maintain.
The warranty period of the equipment is one year, and all the spare parts are selected from well-known brands. During the warranty period, the company can repair or replace the equipment free of charge when there are quality problems such as equipment failure and damage.

We look forward to long-term cooperation with partners around the world to establish mutually beneficial and win-win cooperation. Welcome.