Fennel Mesh Belt Dryer Delivery in Time

Product Description

Description:
Belt dryer is a continuous drying equipment for batch production. It is used for drying sheet, strip and granular materials with good air permeability, for dehydrated vegetables, catalysts, Chinese herbal pieces, such as high water content, but the material temperature does not allow high materials especially suitable; This series of dryer has the advantages of fast drying speed, high evaporation intensity and good product quality. For the paste material of dehydrated filter cake, it can be dried after granulating or making strip.
 

Principle:

The material is evenly spread on the mesh belt by the feeder, the mesh belt adopts 12-60 mesh stainless steel mesh. It is moved in the drier by the driving device. The drier is composed of several units, each unit hot air circulates independently, part of the tail gas is discharged by a special dehumidifying fan, and the exhaust gas is controlled by a regulating valve, heat and dry and remove moisture. The net belt moves slowly, the running speed can be adjusted freely according to the material temperature, the finished product after drying falls into the feeder continuously. The up and down cycle unit can be flexibly equipped according to the user's needs, and the number of units can be selected according to the needs.
The material in the hopper is evenly spread on the mesh belt by the feeder. The mesh belt is generally made of 12 -60 mesh stainless steel wire mesh, which is driven by the transmission device to move in the dryer. The dryer is composed of several units, each unit hot air independent cycle, in which part of the exhaust gas from a special dehumidifying fan 4, each unit of exhaust gas from the control valve. In the upper circulation unit, the air from the circulating fan (5) enters the lower chamber of the unit from the side air duct, and the air flow is heated upward through heater 7, and after being distributed by distributor 6, the air is blown into the mesh belt as a jet flow, pass through the material into the upper chamber. The drying process is that the hot air flows through the material layer to complete the heat and mass transfer process, and the upper chamber is connected by the air duct and the fan inlet. Most of the gas cycle, a part of the lower temperature and moisture content of the gas as a large exhaust pipe, control valves, moisture fan discharge. In the lower circulation unit, the air from the circulating fan enters the upper chamber first, heats up through the heat exchanger downward, passes through the material layer and enters the lower chamber. The lower chamber is connected with the fan by the side air duct and the return air duct, and most of the gas circulates, part of the discharge. The up and down loop units can be flexibly equipped according to the user's needs, and the number of units can also be selected according to the needs.
Used for dehydrating vegetables, generally using three sets of equipment in series to form the initial dry section, the intermediate section and the final dry section. In the early dry section, due to the high moisture content of the material. Poor permeability, so the use of a smaller thickness of the material, faster running speed and higher drying temperature. In the initial drying stage, the drying gas temperature can be as high as 120OC or above. The material retention time in the final dry section is 3 -6 times of that in the initial dry section, and the material thickness is 2 -4 times of that in the initial dry section. For the material temperature not exceeding 60OC requirements, can use about 80oC of dry gas. The performance of belt drier can be better brought into play by using multi-stage combination, and the drying is more uniform.

Structural Diagram:

Scope of application:
It is suitable for drying sheet, strip and granular materials with good air permeability, especially for dehydrated vegetables and Chinese herbal pieces with high moisture content and high temperature This series of dryer has the advantages of fast drying speed, high evaporation intensity and good product quality. For the paste material of dehydrated filter cake, it needs to be granulated or made into rod shape, then it can also be dried.
Features:
1.The vibration and impact of the material on the belt dryer are slight, and the material particles are not easy to be crushed, so it is also suitable for drying some materials which are not allowed to be crushed.
2.With dryer not only for the material drying, and sometimes also for the material baking, burning or curing operations.
3.Dry machine with complex structure, easy to install, can be long-term operation, failure can enter the box internal maintenance, easy maintenance.
4.Can adjust the amount of air, heating temperature, material residence time and feeding speed to obtain the best drying effect.
5.The equipment configuration is flexible, may use the mesh belt flushing system and the material cooling system.
6.Most air is recycled and highly energy efficient.
7.Unique air distribution device, so that hot air distribution more uniform, to ensure product quality consistency.
8.Heat source can be steam, heat conduction oil, electricity or coal (oil) stove supporting.

Technical Parameters:


Product Presentation:

Company Introduction:
Changzhou Yuanze Drying Equipment Co., Ltd. specializes in the production of drying equipment, granulatingequipment, mixing equipment, crushing equipment, dust removal equipment, transmission equipment, dryingequipment and other products, providing a variety of non-standard equipment design, manufacture and installation.Products are widely used in pharmaceutical, chemical, food, feed, biology, electronics and other industries. Since itsinception, the company has provided excellent pre-sale technology and after-sale tracking service to everycustomer, adhering to the company's tenet of "excellent quality, preferential price, timely supply", abiding by thebusiness ohilosophy of "honesty, praamatism, win-win", providing professional services and excellent products tocustomers.

 

The company has a professional technical team, integrating the industry's cutting-edge technology and advancedbusiness management model, actively explore the market, to provide technical exchanges, equipmentmanufacturing, instaation and commissioning, technical training and product after-sales tracking services to alsectors of society.

 

The company is eguipped with testing machines, Customers from allwalks of life are welcome to carry out materiatests and inspect orders. Our company will work hand in hand with you, mutual benefit and win-win, create the future!

 

Business Policy: Integrity as the Foundation, Credit as the Supreme, Quality as the Survival Principle

Service tenet: reasonable price,timely delivery, sincere service for development

FAQ:

1.Where is your factory?
Our company is located in Zhenglu town, Tianning District, Changzhou.

2.How can I get to Your Factory?
A: You can fly directly to Pudong or Shanghai Hongqiao International Airport, then take a high-speed train or bus to Changzhou Railway Station, then we can pick you up in Changzhou Railway Station for our company. My company is about 20km from Changzhou Railway Station.
If you are in China, you can fly to Changzhou Benniu Airport or Wuxi Airport, or you can take a train or bus to our city.
We sincerely welcome you to our company at any time.

3.Delivery Time?
The delivery time is 10-60 days and will vary according to the type of machine, the mode of transportation chosen and the availability of the parts.

4.What is the quality warranty?
The machine is guaranteed to be new (or unused) for a period of 12 months. During this period, the seller will provide free maintenance due to machine quality and free spare parts.

5.What if the machine breaks after the warranty period?
When the machine failure, we will immediately provide you with technical advice and solutions. For those parts that are easy to wear, we guarantee a long-term supply of high-quality parts.



Services:
Pre-sale service
We invite our customers to visit our company and have a face-to-face conversation about the technical requirements.
Sales service
Responsible for debugging the equipment according to customer's requirements for various technical data. Our engineers will train our customers on equipment characteristics and operating points to ensure that the equipment is operating in optimum conditions.
The Adjuster
We provide installation, commissioning, maintenance and training services; provide relevant technical information, equipment, software and GMP certification materials; set up after-sales service hotline, arrange staff to visit customers every year, know more about customer requirements, such as operational issues in the production of customer equipment.
Quality Assurance
Our company is committed to the strict implementation of ISO9001 quality system certification standards, commitment to provide us with new equipment. Advanced Technology, good quality. The equipment is safe and reliable, affordable and easy to maintain.
The warranty period of the equipment is one year, and all the spare parts are selected from well-known brands. During the warranty period, the company can repair or replace the equipment free of charge when there are quality problems such as equipment failure and damage.

We look forward to long-term cooperation with partners around the world to establish mutually beneficial and win-win cooperation. Welcome.