Specification for Rotary Flash Drying Equipment

• Warranty: 1 Year
• Movement Way: Fixed
• Atomization: Rotary Atomization
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XSG
• Flow: Cross Flow
• Heating Mode: Electricity, Steam, Natural Gas
• Material Status: Powder, Cream, Bulk
• Drying Medium: Superheated Steam, Air
• Operation Pressure: Pressure Coneying
• Transport Package: Pressure Coneying
• Specification: 2000X8000X4800
• Trademark: Motozawa drying
• Origin: China
• HS Code: 6802101000
• Production Capacity: 200

Product Description

Flash dryer Feature
1. The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.
2. Machine materials : AISISUS304 , AISISUS316L, and other material .
3. The feeding system for this machine can be screw feeder .
4. For the electrical component  , we mainly use international brand such as ABB ,Siemens . Control system has more choices, such as push button , HMI+PLC and so on.
5. Highly polished inner and outer surfaces of the machine, no dead comer, easy to clear, no cross contamination. Smooth running, reliable performance, easy operation.
6.The collection rate of finished product is very high.
To adopt cyclone separator with high efficiency and low resistance (the collection rate can be above 98%), together with air chamber type of pulse cloth bag duster(the collection rate can be above 99.9%).
7.To control final water content and fine of finished product efficiently
To control final water content and fine of finished product through adjusting screener and inlet air speed.
8. No materials stick on the wall
Continuous high-speed air flow washes out the materials stayed on the wall strongly in order to clear the phenomenon that materials stay on the wall.
9. This machine is good at processing thermal sensitive materials, The bottom of main machine belongs to high temperature area. The air speed in this area is very high, and the material can hardly contact heat surface directly, so there is no worry about burning and color changing.
10. Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.
11.Silicon Carbide Spin Flash Dryer: When oil is used to heat, use automatic constant temperature control. Its temperature of operation can be adjusted form 80-160ºC .
12.The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling air flow
13. Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
14. The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.